| PMC 32MBytes Dual Port Synchronous DRAM Module |
show me a bigger picture
This page contains features, a description and specifications for the 32M-DPSDRAM module.
FEATURES:
- Dual Port PMC(PCI Mezzanine Card) SDRAM module
- Capacity: 32 Mbytes
- Burst Mode Transfer Rate - Full Page with 132 Mbytes/sec - Write and 110 Mbytes/sec - Read
- Compatible with PMC Specification Rev. 2.0
- Transparent Refresh Mode during bus access
- Internal clock 66 MHz
- Low voltage 3.3V logic
The 32MDPSDRAM module is a 32 bit wide, high speed dual port PMC bus memory module capable of burst mode accesses from both Ports at full bus bandwidth of 33 MHz. The module is a bus target only. The configuration space header for each Port of the board returns class code of 05H, indicating it is a memory controller. The Memory is organized as area of 16 Synchronous DRAM chips by 2MB each in 4 Banks. Using a bi-directional FIFO's as a buffer and internal clock at 66 MHz provides fast access to the memory area. PMC bus targets and memory manager controller are implemented in EPX8160QC208 FLASH Logic from ALTERA.
SPECIFICATIONS:
- Compatibility - PMC Specification Rev.2.0
- Capacity - 32 Mbytes
- Memory speed - 10 cycles read only latency at 33 MHz, one 32 bit data transfer per clock cycle thereafter in burst mode
- Power Requirements - +5V / 500mA
Last modified by me: 06 July 2000
Gueorgui.Antchev@cern.ch